特性/Features
玻璃化温度130~155℃ B~F级 (DSC)
TG130~155℃ B~F Class (DSC)
产品成型精度高
High precision
优异的机械性能和电性能
Excellent mechanical properties and electric properties
主要特性/General properties
拉挤件是由不饱和聚酯或环氧乙烯基等玻璃纤维材料经特殊的模具拉挤而成型的制品,具有较高的机械强度,介电强度及耐电压高,吸水率低,尺寸公差稳定,翘曲度小等特点。
可以根据产品的尺寸来开模具一次成型(ex:U型、L型、C型、I型、工字型、T型、◎型、□型、◯型等各种形状),效率高、成品率高、成本相较于加工会更低,适合批量生产产品。
Pultrusion parts are made of epoxy glass fiber material such as unsaturated polyester or epoxy vinyl ester resin through special pultrusion mould .The properties are as below :high mechanical strength, high dielectric strength and voltage resistance, low water absorption ,stable size with good tolerance ,minimum warp etc.
The products can be made to any parts according to requirement ((ex: U shape, L, C shape, 工 shape, T shape,◎ shape, □ shape ,◯ shape,ect.)It is a better way than CNC because of the high efficiency, high yield, low cost ,which is more suitable for mass production.
参数/Parameters
力学性能 Mechanical properties | 典型值 Typical Value | 单位 Unit | 测试标准Test standard | |
拉伸强度 Tensile Strength | LW | 230-600 | Mpa | ASTM D-638 |
CW | 45-80 | |||
拉伸模量 Tensile Modulus | LW | 18-30 | Gpa | ASTM D-638 |
CW | 7-13 | |||
弯曲强度 Flexural Strength | LW | 300-700 | Mpa | ASTM D-790 |
CW | 80-120 | |||
弯曲模量 Flexural Modulus | LW | 20-26 | Gpa | ASTM D-790 |
CW | 7-12 | |||
压缩强度 Compression Strength | LW | 280 | Mpa | ASTM D-695 |
CW | 105 | |||
压缩模量 Compression Modulus | LW | 21 | Gpa | ASTM D-695 |
CW | 7.9 | |||
层间剪切强度 Interlaminar Shear Strength | LW | 25 | Mpa | ASTM D-2344 |
冲击强度 Impact Strength | 280 | KJ/M2 | ASTM D-256 | |
物理性能 Physical Performance | 典型值 Typical Value | 单位Unit | 测试标准 Test standard | |
巴氏硬度 Barcol hardness | 50 | --- | ASTM D-495 | |
吸水率(25℃,24h) water absorption | 0.2-0.5 | % | ASTM D-570 | |
密度 density | 1.75-2.00 | g/cm3 | ASTM D-792 | |
热膨胀系数(LW) CTE | 5.0 | 10-6/℃ | ASTM D-696 | |
导热系数 Thermal conductivity | 0.4 | W/(m.K) | ASTM C-518 | |
断裂伸长率 elongation at break | 0.9 | % | ASTM D-638 | |
电学性能 electrical properties | 典型值 Typical Value | 单位 Unit | 测试标准Test standard | |
耐电弧性(LW)arc resistance | 120 | 秒 second | ASTM D-495 | |
介电常数(PF) Dielectric Constant | 5 | @60hz | ASTM D-150 | |
介电强度(PF) dielectric strength | 8 | KV/mm | ASTM D-149 | |
介电强度(LW)dielectric strength | 1.6 | KV/mm | ASTM D-149 | |
表面电阻系数 surface resistivity | 1015-1012 | ? | ASTM D-257 | |
体积电阻系数 volume resistivity | 1015-1012 | ?NaN | ASTM D-257 | |
阻燃性能 Flammability | 典型值 Typical Value | 单位 Unit | 测试标准Test standard | |
隧道试验tunnel test | Max 25 | 秒 second | ASTM E-4 | |
25-28 | % | ASTM 2863 | ||
28-32 | ||||
>32 | ||||
可燃性分級 flammability classification | ASTM D635 |
应用领域/Applications
机械、电机、电器设备中作绝缘结构零部件。
Used for mechanical, electrical, electrical equipment as the insulation component.